Starkey Hearing Technologies Control Surface BTE 312, Operation Manual

Page: 18 / 40

18 | Operation
at the minimum setting. The next time you touch the
control surface, the volume will increase one step.
Continue to touch and release until you reach the
desired loudness.
NOTE:
If 10 minutes or more have passed since the
last volume change, the volume will automatically
decrease before it increases.
Volume Settings
Some hearing aids can be set for the Right hearing
aid to increase the volume and the Left hearing aid
to decrease the volume. Ask your hearing professional
if this setting would benefit you.
Your hearing aid will always power-on to the optimal
volume setting determined by your hearing
professional. The minimum and maximum steps
will have an additional tone following the beeps.
Ask your hearing professional about your specific
hearing programs.
Volume Level Tone
Level 5 (More volume) Five beeps plus tone
Level 4 Four beeps
Level 3 (Power-on volume level) Three beeps
Level 2 Two beeps
Level 1 (Less volume) One beep plus tone