-3-
The
Starburst Phantom
®
is designed to be mounted
on the inside of your vehicle. It is not intended for exterior
applications and is not warranted against water damage.
It is the sole responsibility of the owner to ensure the warning light is
secure. Check your light every time you enter the vehicle to ensure that
it is mounted securely. The manufacturer assumes no responsibility for
the secure mounting of this light.
The following mounting instructions describe the standard, most common
way to mount this light. This method may or may not apply to your vehicle.
Because vehicles can vary widely in their design, it may be necessary to
configure the brackets differently than described. Some applications may
require you to design your own custom brackets. The installer assumes all
responsibility for the integrity of the installation.
It is the sole
responsibility of the owner to ensure the light is secure.
Mounting Instructions
The ULB42-DLP and ULB44-DLP are designed to be mounted in the front
windshield of a vehicle using the pre-existing visor clips.
General Information
ULB42-DLP:
Interior undercover discrete LED lightbar with high-power
Generation-4 LED Takedown/Pursuit Lights
ULB44-DLP:
Interior undercover high-power Generation-4 LED lightbar with
high-power Generation-4 LED Takedown/Pursuit Lights
•
The ULB42-DLP and ULB44-DLP each consist of 10 LED arrays.
•
Eight of the arrays are used for "warning" purposes.
•
The remaining two arrays utilize high-power Generation-4 LEDs and are
used for takedown/pursuit lights.
DLP
Lights
Warning Lights
