-11-
Button Operation
Operating Instructions
Functions Switched Through Wires
Main control of this light is done though four of the wires in the harness. They
should be connected to +12VDC through 4 switches
(user supplied)
as described
in the
Wiring
section.
Applying power to the appropriate wire elicits the functions described below.
LED Flashing Mode
(Orange w/Red)
The Warning LEDs will flash according to the pattern you have selected (See
Pattern Select/Burst Mode Button
section on next page).
All LED Steady Burn Mode
(Green w/Red)
The Warning LEDs will not flash, but instead will remain lit, similar to Takedown
lights.
DLP Pursuit Mode
(White w/Brown)
The LED DLP lights will flash, alternating back and forth at the speed you had
selected when this function was last deactivated (See
Pattern Selection
section
on next page).
DLP Takedown Mode
(Green w/Yellow)
The LED DLP lights will not flash, but instead will remain lit.
DLP
Lights
Warning Lights
