40
5.4
Advanced Setup
5.4.1
WAN
The WAN page under the Advanced Setup allows you to Add, Edit, or
Remove to configure the WAN interface.
To edit the required parameters, click the Edit button next to the selected
connection in the table.
If you wish to remove the connection from the table list, tick the Remove
checkbox next to the selected connection and then click the Remove
button.
Click on the Add button if you wish to add a new connection.
Click Save/Reboot to take effect the settings.
5.4.2
LAN
The LAN page under the Advanced Setup allows you to configure the Lynx
L-220 IP address and the subnet mask for the LAN interface. The default IP
Address and Subnet Mask of the router is 192.168.1.1 and
255.255.255.0 respectively.
The Start IP Address is where the DHCP server starts issuing IP addresses.
This value must be greater than the ADSL Router IP address value. For
example if the ADSL Router IP address is 192.168.1.1 (default) than the
starting IP address must be 192.168.1. 2 (or higher).
