6.7 - Deflector adjustments
The deflector is used exclusively with granular products. It has the two selectable positions
(position 1 and 2) - see figure 24, which should be verified before starting the job.
The adjustment is directly affected by the type of application conditions:
Position 1:
for rate up to 150 kg/ha;
Position 2:
for rates above 150 kg/ha.
2
1
The position of the deflector support, shown on figure 25, should be addressed prior to the
installation of the deflector. The components are factory set, but it is still important to verify the
dimensions, after a scheduled maintenance.
39 mm
Figure 24
Figure 25
22
