4
DAILY OPERATION
CERTAIN SURFACES ARE EXTREMELY HOT DURING
OPERATION AND CARE SHOULD BE TAKEN WHILE
USING THIS UNIT.
DO NOT LEAVE THE UNIT IN OPERATION WITHOUT
AN ATTENDANT.
DO NOT LEAVE THE UNIT AT HIGH TEMPERATURE
WHEN NOT IN USE OR DURING IDLE PERIODS.
ELECTRONIC VERSION [SCT4000E]
upper
▲
button
upper
▼
button
display screen
lower
▲
button [DARKER]
lower
▼
button [LIGHTER]
[PROGRAM] button
START UP / PREHEAT
i.
When the toaster has been plugged into a suitable
outlet and power supply, the power switch can be
flipped to turn the unit on.
ii.
The toaster will enter into its
PREHEAT
mode and
a percentage will appear on the screen. The fan and
belts will turn on and the platen will begin to heat up.
iii.
The unit will, by default, use the belt speed and set
point settings last used before the previous
shutdown.
MAIN MENU
i. DISPLAY
—Once the toaster has been pre-heated,
menu products will appear in two lists on the display
separated into a front and back side. The front conveyor
and heaters are controlled
by the left side buttons
and the back side is
controlled by the right
side buttons.
ii. UPPER
▲
/
▼
ARROWS
—The selected preset can be
changed simply by pressing the upper
▲ or ▼
on
the corresponding side until the desired preset is
highlighted. The speed setting change will occur
instantly.
iii. DARKER/LIGHTER
—The “DARKER” and “LIGHTER”
▲ and ▼
buttons can be pressed up to ten [10] times
in each direction to activate a conveyor speed
adjustment mode from the main menu. The “DARKER”
and “LIGHTER”
▲
and
▼
buttons will cause the belt
to slow down or speed up on the corresponding side
allowing quick adjustments in toasting color. Selecting
“LIGHTER” will increase speed, while selecting “DARKER”
will decrease speed. Adjustments made here will reset
to the original time after the cycle time has finished.
ANALOG VERSION [SCT4000]
START UP / PREHEAT
i.
When the toaster has been plugged into a suitable
outlet and power supply, the power switch can be
flipped to turn the unit on.
ii.
Turn the thermostat to the desired set point and
allow 20-30 minutes of preheat time to ensure the
proper temperature can has been reached before
beginning to pass product through the toaster.
SHUTDOWN
Disconnect power to the unit with the power button
at the end of each day of operation.
BACK
FRONT
LIGHT DARK LIGHT DARK
MUFFIN
FLATBREAD
CROISSANT
BAGEL
CROISSANT
MUFFIN
