6
PRODUCT SETTINGS AND ADJUSTMENTS [SCT4000E ONLY]
The Star contact toaster comes with pre-programmed factory default settings
for toasting some products, although the settings will need to be adjusted to
accurately toast your specific buns.
User defined settings can be saved with no
set limit to the variations that can be used. Users can customize product names
and belt speed.
CHANGING CONVEYOR SPEED [TOAST TIME]
i.
To adjust the conveyor speed [toast time], begin by pressing the
PG
button.
ii.
Using the upper, left
▲
and
▼
buttons, select the product to be adjusted.
iii.
Using the upper, right
▲
and
▼
buttons, change the speed [toast time].
iv.
Hit
PG
again to save changes.
CHANGING PLATEN TEMPERATURE
i.
To adjust the platen temperature, begin by simultaneously pressing the
PG
button and the lower, right
▲
button.
ii.
Using the upper, right
▲
and
▼
buttons, change the platen temperature.
iii.
Hit
PG
again to save changes.
PROGRAMMING
LOADING A PRODUCT FILE
i.
Ensure the toaster is powered on before beginning.
ii.
Plug a USB flash drive containing the desired .csv file into the receptacle.
iii.
The display will automatically search for all files with the correct .csv extension.
These will then be shown on the display.
iv.
Select the desired file to upload with the upper right side
▲
and
▼
buttons and
the
PG
button.
v.
Programming may take up to several minutes. The display will reset when finished,
and the toaster will resume normal operation.
EDIT PRODUCT SETTINGS [ON TOASTER]
THE SETUP MENU IS USED TO EDIT THE PRODUCT NAME, CONVEYOR SPEED,
OR HEATER SETTING FOR ANY EXISTING PRODUCTS.
i.
To access the setup menu, while on the main screen, press and hold the
PG
button for a few seconds until the setup screen appears.
ii.
The selected product can be changed using the
▲
and
▼
buttons on the upper
left side.
iii.
The right “DARKER” and “LIGHTER”
▲
and
▼
buttons are used to cycle between
the other settings.
iv.
The belt speed values can be changed using the upper right side
▲
and
▼
buttons. All values are set in whole numbers.
v.
Once finished, press the
PG
button to exit to the main menu. Settings update
instantly.
EDITING PRODUCT NAME
i.
Once in the setup menu, press the left “LIGHTER”
▼
button on the product name
to begin editing.
ii.
Use the upper right
▲
and
▼
buttons to cycle through characters and the upper
left
▲
and
▼
buttons to move selection from character to character. Spaces
cannot be used. Any characters after a space will not appear in the product
name in the menu. The name can be up to a maximum of nine [9] characters.
iii.
Press the
PG
button to save and exit.
DON’T REMOVE
USB FLASH
DRIVE OR TURN OFF
POWER UNTIL THE
PROGRAMMING IS
COMPLETE. CAUTION
TOASTER MAY NOT
FUNCTION PROPERLY.
