6
SETTINGS AND ADJUSTMENTS
The Star IRCS conveyor toaster comes with pre-programmed factory default settings
for toasting croissants, muffins, bagels, biscuits, and buns.
The default settings are
set at “8” for top heat, “7” for lower heat, and “15” for conveyor speed.
User defined
settings can be saved with no set limit to the variations that can be used. Users can
customize product names, conveyor speed, melt time, light/dark setting, and upper,
lower, left, and right heat settings.
PROGRAMMING
LOADING A PRODUCT FILE
i.
Ensure the toaster is powered on before beginning.
ii.
Plug a USB flash drive containing the desired .csv file into the receptacle.
iii.
The display will automatically search for all files with the correct .csv extension.
These will then be shown on the display.
iv.
Select the desired file to upload with the right side
▲
and
▼
buttons and the
“DARKER/ LIGHTER” button.
v.
Programming may take up to several minutes. The display will reset when finished,
and the toaster will resume normal operation.
EDIT PRODUCT SETTINGS [ON TOASTER]
THE SETUP MENU IS USED TO EDIT THE PRODUCT NAME, CONVEYOR SPEED,
HEATER SETTING, OR MELT TIME FOR ANY EXISTING PRODUCTS.
i.
To access the setup menu, while on the main screen, press and hold the “DARKER/
LIGHTER” button for a few seconds until the setup screen appears.
ii.
The selected product can be changed using the
▲
and
▼
buttons on the left side.
iii.
The right “MERGE” and “REVERSE” buttons are used to cycle between the other
settings.
iv.
The heat settings [power 1–10], melt time [1–60 seconds], or conveyor speed
[6–60 seconds] values can be changed using the right side
▲
and
▼
buttons.
All values are set in whole numbers.
v.
Once finished, press the “DARKER/LIGHTER” button to exit to the main menu.
Settings update instantly.
EDITING PRODUCT NAME
i.
Press the left “REVERSE” button on the product name to begin editing.
ii.
Use the right
▲
and
▼
buttons to cycle through characters and the left
▲
and
▼
buttons to move selection from character to character. Spaces cannot be used.
Any characters after a space will not appear in the product name in the menu.
The name can be up to a maximum of nine [9] characters.
iii.
Press the “DARKER/LIGHTER” button to save and exit.
SOFTWARE/PRODUCT UPDATE
Updates to the toaster product files can be accomplished quickly and easily through
the use of the USB port located beneath the control panel. Existing product names
and settings can be modified using this process as well.
DO NOT REMOVE USB FLASH DRIVE OR TURN OFF
POWER UNTIL PROGRAMMING IS COMPLETE.
CAUTION TOASTER MAY NOT FUNCTION PROPERLY.
SETUP
PRODUCT: CYCLE TIME:
HEAT ZONES:
BAGEL
MELT
TOP
BOTTOM
13
03
06
06
** TRANSFER COMPLETE **
Remove FLASH Drive to Exit
Remove FLASH Drive to Exit
FILES
Press L/D to select
Press UP LEFT to upload
Presets into Toaster
Press DN LEFT to copy
Presets onto FLASH Drive
Remove FLASH Drive to Exit
