CrossTrainer Service Manual
12
CrossTrainer Service Manual Rev A 620-7575
Trouble Shooting - Noises : Pinging (cont.)
2. Have someone ride the unit and verify where the contact between the pedal arm and the disk
is occurring.
3. If the head of the bolt in the forward end of the pedal arm is hitting the disk, you may be able to
adjust the position of the bolt by twisting the arm to eliminate the noise.
4. Use the largest adjustable end wrench (crescent wrench) to twist the base of the pedal arm.
x
Place a piece of paper over the pedal arm, to prevent scratching it with the wrench, just in
front of the foot pedal but before the upward bend.
x
Slide the wrench over the paper and all the way down on the pedal arm. Be sure the handle
of the wrench points toward the middle of the machine.
5. Carefully push down on the handle of the wrench to twist the pedal arm, moving the top of the
pedal arm and the bolt head away from the disk. You may need to use a breaker bar on the
handle of the wrench to get more leverage.
