Page 7
21.
Use a #2 phillips screwdriver to remove the four
screws securing the side-bed covers to the frame,
then lift the side-bed covers up.
NOTE:
The screws are angled, take care when
reinstalling the hardware as to not strip the screws.
22.
With the side-bed covers lifted, install the motor
shroud (715-4257-XX), then use a #2 phillips
screwdriver to secure the motor shroud to the
frame using two (2) pieces of the M5 x 16mm pan
head machine screw (110-3561).
23.
Install the right side corner shroud (715-4268-XX)
then use a #2 phillips screwdriver to secure the
shroud to the frame using four (4) pieces of the
M5 x 16mm pan head machine screw.
24.
Repeat Step 12 for the left corner shroud (715-
4267-XX).
25.
Lay the side-bed covers back down into position
and reinstall the screws removed in Step 10.
INSTALL LAST