Page 9
CONSOLE INSTALLATION
NOTE:
Depending on which console was purchased,
the install instructions could be diff erent - please see
console owner’s manual for additional information.
1.
Use a #2 phillips screwdriver to secure the back
console shroud to the console mount using ten
(10) pieces each of the #8-18 x 3/4” screw (110-
3402) and M4 x 12mm fl at washer (120-3307).
2.
Slide the tube collar (020-7821-XX) into place,
then secure it to the back console shroud using
two (2) pieces of the #8-18 x 3/4” screw.
3.
Refer to the documentation contained inside the
console box in order to connect the cables from
the unit to the console.
4.
Use a #2 phillips screwdriver to attach the
console front to the back shroud using ten (10)
pieces of the #8-18 x 3/4” screw.