Page 5
16.
Carefully lay the handrail assembly built in Steps
3-5 onto the deck on its right side, then route the
wires from Step 2 into the frame.
17.
Use a ratchet wrench with a 19mm socket to
adjust the frame wedge bolts to ensure the gap
between the wedge and the frame is 63mm.
63.00 mm
18.
With two people, carefully lift the handrail
assembly and install it onto the frame. Once the
handrail assembly is set onto the frame, route the
wires through the hole in the frame and into the
motor compartment.
CAUTION:
Be careful not to damage the wires
when installing the handrail assembly.