– 39 –
n
DIP switch
SW No.
Function
ON
OFF
1-1
Always ON
Should be set on
1-2
Auto Cutter *1
Invalid
Valid
1-3
Always ON
Should be set on
1-4
Command emulation
Star
ESC/POS
1-5
USB mode *2
Printer class
Vendor class
1-6
2 colors printing
Valid
Invalid
1-7
Reserved
1-8
Print head model *3
18 pin wire
9 pin wire
*1 The factory settings for enabling/disabling the auto cutter are as follows.
Models without auto cutter: Invalid (Switch 1-2 = on)
Models with auto cutter: Valid (Switch 1-2 = off)
Note:
Do not enable the auto cutter for models without the auto cutter (i.e., models with a
tear bar). A mechanical error will occur.
*2 USB interface model only
*3 Do not change the default setting (Switch 1-8 = on).
