- 16 -
3.1.1 Button
1) POWER Button :
1
Pressing and holding the POWER button for 3 seconds or more will turn the power on or off.
2
Pressing both the POWER and FEED buttons simultaneously will cause the ERROR lamp to
flash 5 times and put the printer into Memory Switch Setting mode. The POWER button can
now be used to change Printer MODE status visible on the LCD screen for fast configuration.
(Refer to
2.4 Memory Switch Settings
for details about mode conversion)
2) FEED Button :
When the printer is on, paper can be fed manually by pressing and holding the-
FEED button for more than one second.
3.1.2 Panel Lamp
1) POWER (Green) :
Printer is ON and ready to receive data.
2) ERROR (Red) :
Indicates an error has occurred. (Ex: Paper Out, Cover Open, etc)
3.1.3 LCD
3. Printer Features
3.1 Control Panel
LCD will display most of the printer status.
1) The 128 × 32 dot display shows alphanumeric characters.
2) Content
Mode/Status : Indicates the currently specified printer mode or error status.
Data communication status :
... The image shown on the left indicates that the data
communication status is good.
Remaining battery power :
... There is sufficient remaining battery power.
... The remaining battery power is low. Please charge
the battery pack. (*)
Flashing
... The remaining battery power is extremely low.
Stop using the printer immediately, and charge the
battery pack. (*)
Note*): If you continue printing at the low remaining battery
power status, the printer cannot feed paper properly and
may print with condensed (narrow) line spacing.
Bluetooth connection status :
... The mark on the left indicates that there is a Blue-
tooth connection.
When there is no Bluetooth connection, the mark is
not displayed.
POWER
ERROR
Bluetooth Mode
Mode Status
Remaining battery power
Data Communication Status
Bluetooth Connection Status
FEED Button
POWER Button
ERROR Lamp
POWER Lamp
LCD
