Star Micronics NX-1000, User Manual

Page: 82 / 122

Line feed
Mode ASCII
Decimal H exadecim al
Both < L F > 10
OA
Prints the current line and feeds the paper to the next line. I f D IP sw itch
1-2 is O N , also m oves the next print p osition to the left m argin. See the
preceding com m ands for the line spacing.
R everse line feed
Mode ASCII Decimal H exadecim al
Both < ESC > < L F >
27 10 IB OA
Prints the current line and feeds the paper in the reverse direction to the
preceding line. If D IP switch 1-2 is O N , also m oves the next print position
to the left margin. See the preceding com m ands for the line spacing.
Ignored when friction feed is used.
Perform one
n l
216-inch line feed
Mode ASCII
Decimal H exadecim al
Both < ESC > “J ”
n
27 74 n
IB 4A
n
F eeds the paper once by /i/2 l6 inches, where n is betw een 1 and 255.
D o e s not m ove the print position right or left when D IP switch 1-2 is
O F F . D o es not change the line-spacing setting. Ignored w hen friction
feed is used.
Perform one
n l
216-inch reverse line feed
Mode ASCII Decimal
H exadecim al
Both < E S C >
“j ”
n 27 106 n IB 6A
n
F eed s the paper once by n / 216 inches in the reverse direction, where n
is betw een 1 and 255. D o es not m ove the print position right or left when
D IP sw itch l- 2 is O F F . D o es not change the line-spacing setting. Ignored
w hen friction feed is used.
Feed p ap er n lines
Mode ASCII
Decimal tloxadecim al
Both
< ESC >
“r “ 1 ” n 27 102
49
n III 66 31 n
< ESC > “f” < 1 > n
27 102 1 n
III
66
01
n
F eeds the paper n lines from the current line, where n is betw een 0 and
127.
72