D-F0382 NP-266/366 Product specifications Ver.1.10
51
17) NV bit image pattern register
: << GS T n >>
Code: [1D] h + [54] h + n
*['1'
≤
n
≤
'2']
Register contents of page buffer as NV bit image pattern.
* It is necessary to write the data to be registered in the page buffer. Printing is not needed.
* There are two patterns able to be registered. (Selected by ‘n’ value)
* The registered data is effective until it is re-registered.
* Once registered, power on/off , printer initialization does not clear the data.
18) NV bit image pattern lay over
: << ESC F n >>
Code: [1B] h + [46] h + n * ['0'
≤
n
≤
'2']
Specifies if the previously registered NV bit image pattern should be laid over to print (OR print),
at printing the data by Print page feed <FF>.
* n means as follows:
* This command specification is effective until it is reset, execute <printer initialization>, the
power is set off.
* The default value of n is '0'.
19) Barcode print/edit : << GS b n1 nx1 nx2 nx3 ny1 ny2 ny3 n4 Dn LF >>
Code: [1D] h + [62] h + n1 + nx1 + nx2 + nx3 + ny1 + ny2 + ny3 + n4 + Dn + [0A] h
Selects barcode structure and print/edit * ['0'
≤
n1
≤
'6']
* Selects the following barcode structure by n1 value: * ['0'
≤
n4
≤
'2']
n1 Barcode
structure Characters
'0' UPC-A
12
'1' UPC-E
12
'2' JAN-13(EAN-13)
13
'3' JAN-8(EAN-8)
8
'4' CODE39
Changeable
'5' ITF
14,
16
'6' CODABAR
Changeable
*['000'
≤
nx1nx2nx3
≤
'150'] NP-266
*['000'
≤
ny1ny2ny3
≤
'150'] NP-266
*['000'
≤
nx1nx2nx3
≤
'110'] NP-366
*['000'
≤
ny1ny2ny3
≤
'110'] NP-366
* Specifies x axis (mm) for print/edit position by nx1, nx2 and nx3 and y axis (mm) by ny1, ny2
and ny3. It specifies in the same manner as Print/edit position setting.
* The following rotation is specified by n4 value.
n4 Rotates
'0' 0
degree
'1' 90
degree
'2' 270
degree
* Dn indicates the character code to be printed.
* If the character code (Dn) cannot be printed, the data after the code is treated as the
non-specified data.
* If a barcode is selected with character volume fixed, it needs to match to the character volume.
* If the barcode exceeds the size of page, print/edit of the barcode is not executed.
* The print/edit position for the general characters does not move after barcode print/edit.
n Function
'0' Clears lay over
‘1’ Set lay over pattern 1
'2' Set lay over pattern 2
