D-F0382 NP-266/366 Product specifications Ver.1.10
54
5.7 Mode status of setting functions (Page mode)
Setting function
Power ON Command
ESC
c
Remarks
Page buffer
Clear
ESC c/ ESC I
Clear
Internal receive buffer
Clear
Not applicable
Keep
Select print edit direction
‘1’
Optional
‘1’
Setting page length
150mm
Optional
150mm
NP-366: 110 mm
Space between lines
0 dot
Optional
0 dot
Select enlarged printing (horizontal)
Regular size
Optional
Regular size
Select enlarged printing (vertical)
Regular size
Optional
Regular size
Select double size horizontal enlargement
(auto cancellation function)
Clear Assign Clear
Select 4 folded enlargement printing (auto
cancellation function)
Clear Assign Clear
Register NV bit image pattern
Not
registered/
Registered
(Flash Rom)
Optional Keep
Select NV bit image pattern layover
Clear
Optional
Clear
Select barcode width
3 dots
Optional
3 dots
1 module=3 dots
Select barcode height
20mm
Optional
20mm
Assign HRI character edit
no print
Optional
no print
Print Density setting
DS1-4
optional
keep
Notes
1. Underline width: the last used width set by [Assign underline]
2. Assign/clear underline is applied each time when either command is executed.
3. The effect of double strike character and bold character functions are the same. The command will
take effect when either command is executed.
4. Original DIP SW setting
(when turning on Power
〔
or reset
〕
or reset)
