―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
3-54
ETB
[Name] Update ASB ETB status
[Code]
ASCII ETB
Hex.
17
Decimal 23
[Defined Area]
- - -
[Initial Value]
- - -
[Function]
(1) Specifications
Sets the ASB ETB status when reading this command from the reception buffer, then sends ASB.
See Appendix 2, ASB Status for details.
(2) Specifications
Sets the ASB ETB status when reading this command from the reception buffer. Then, after
updating the ASB ETB counter, sends the ASB status.
See Appendix 2, ASB Status for details.
The following outlines the details of processes in this command.
(1) Reads ETB command from reception buffer.
(2) Waits for printing of the print data before the ETB command to end.
(3) Increments the ASB ETB counter by 1 after checking that printing has ended, then sets the ASB
ETB status.
(4) Sends ASB (only when ASB is enabled).
ESC RS E n
[Name] Initialize ASB ETB counter and ETB status
[Code]
ASCII ESC
RS
E n
Hex.
1B
1E
45 n
Decimal 27
30
69 n
[Defined Area]
n = 0
n = 48 (“0”)
[Initial Value]
ASB ETB counter = 0
[Function]
Clears the ASB ETB counter to zero, then clears the ETB status.
However, ASB status is not send when clearing the ETB counter to zero using this command. The
ETB counter and ETB status are initialized by the following command, not this command.
• Cancel print data and initialize command <CAN>
