Star Micronics Line Thermal Printer Specifications Download Page 132 | Manualshive

Page: 132 / 181

background image

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――

STAR Line Mode Command Specifications

3-116

Cell

Alignment Pattern

3.13.

Two-Dimensional Bar Code QR Code Command Details

* Note that QR code is a registered trademark of DENSO WEB.
This command is for printing 2-dimensional bar code QR codes. There are four functions of the commands relating to
the 2-dimensional bar code QR codes, shown below.

(1) Set bar code type

(<ESC> <GS> “y” “S”)

(2) Set bar code data

(<ESC> <GS> “y” “D”)

(3) Set page mode

(Reserved)

(4) Print Bar code

(<ESC> <GS> “y” “P”)

(5) Set bar code type

(<ESC> <GS> “y” “I”)

The details of each function are described below.

(1) Set bar code type
These commands set the bar code type. Because all initial values are set, use these only to make changes. (See the
details for each setting below.)

<ESC> <GS> “y” “S” “0” Sets the model
Currently supported models are model 1 and model 2. Model 2 has a configuration including an alignment bar to
improve its support of weight to handle skewing when codes are large.

<ESC> <GS> “y” “S” “1” Sets the error correction level
QR codes can be read even if a part of the data is corrupted, by using error correction. Raising this level increases the
size of the bar code because there is an increase in preparatory information.

<ESC> <GS> “y” “S” “2” Specifies the size of the cell (One four squared region configuring the QR code)
The QR code is formed into a square of an equivalent size in the vertical and horizontal directions, but the size of the bar
code image that is generated depends on the cell size setting. See Appendix 7 for details on the actual printed size of
the QR code.

These settings are individual settings. Therefore, even though there may not be any particular problem in each of them,
there is the potential for an error to be generated. (See the descriptions below.) In such cases, the bar code will not be
generated and the (4) Print command (<ESC> <GS> “y” “P”) is ignored. With the (5) Get bar code expansion
information command, an error code is returned.

• Error is generated when generating a bar code by the combination of each setting command.
• Print data exceeds the currently set print region

Therefore, it is recommended to use (5) Get bar code expansion information command (<ESC> <GS> “y” “I”) as a
means for checking for these errors prior to printing.

«
...
130
131
132
133
134
...
»

Summary of Contents for Line Thermal Printer






















































































































































































Reviews:

No comments

Related manuals for Line Thermal Printer

All in One Printer

Brand: Xerox Pages: 3

Brand: Panasonic Pages: 102

Brand: VASTEX Pages: 15

Brand: Eazao Pages: 50

VariQuest Perfecta 2400STP

Brand: Varitronics Pages: 227

Brand: Seiko Pages: 76

Brand: Oki Pages: 126

Brand: Oce Pages: 209

Brand: OmniPrint Pages: 44

Makerspace 91413

Brand: Mooreco Pages: 10

DocuPrint C3300 DX

Brand: Xerox Pages: 200

Brand: Oki Pages: 83

Brand: Citizen Pages: 44

Delta Rostock mini G2

Brand: Geeetech Pages: 85

Robojet Disc Autoprinter

Brand: Aleratec Pages: 38

Brand: Magicard Pages: 31

Brand: Oki Pages: 220

Brand: Lexmark Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands