manualshive.com logo in svg

Star Micronics Line Thermal Printer, Specifications, Page: 150 / 181

Share
Download
Star Micronics Line Thermal Printer Specifications Download Page 150

  

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――

 

STAR Line Mode Command Specifications 

5-9 

 
3. Printer Status 
Printer status is the status of the printer sent from the third byte of the automatic status.   
Printer status is returned for (transmitted byte count – 2 in Header – 1). 
Printer status is always updated for new information.  (No log exists.)  The following shows the composition of the status.   
 
  <Printer status 1  Printer status (Third Byte)> 

Bit Contents 

Status 

Model 

Compatability 

  

“0” 

“1” 

TSP800 TSP700 TSP600 TUP900 TSP1000 

TSP828L TSP700II

TSP650 

7 

Fixed 

at 

“0” 

 

-  - - - - - - - - 

6 

OFFLINE By Switch Input  

No 

Yes  No No No No No NO NO NO 

5 Cover 

Status 

Closed 

Open  OK OK OK OK OK OK OK OK 

4 

Fixed 

at 

“0” 

 

-  - - - - - - - - 

3 ONLINE/OFFLINE 

Status ONLINE  OFFLINE OK OK OK OK OK OK OK OK 

2 Conversion 

SW 

Open 

Closed  OK OK OK No  No NO OK OK 

1 <ETB> 

Command 

Not 

Executed Executed OK OK OK OK OK OK OK OK 

0 

Fixed 

at 

“0” 

 

-  - - - - - - - - 

• <ETB> Command 
Cleared when received at the host (by clearing bit 1 to 0, automatic status is not targeted to occur).   
 
 
  <Printer status 2  Error Information (Fourth Byte)> 

Bit Contents 

Status 

Model 

Compatability 

  

“0” 

“1” 

TSP800 TSP700 TSP600 TUP900 TSP1000 

TSP828L TSP700II

TSP650 

7 

Fixed 

at 

“0” 

 

-  - - - - - - - - 

6 

Stopped by high head 
temperature 

Not stopped

Stopped 

OK OK OK OK OK OK OK OK 

5 Non-recoverable 

Error 

No 

Yes 

OK OK OK OK OK OK OK OK 

4 

Fixed 

at 

“0” 

 

-  - - - - - - - - 

3 Auto-cutter 

Error 

No 

Yes  OK OK OK OK OK NO OK OK 

2 

Mechanical 

Error 

No 

Yes  No No No No No NO NO NO 

1 

Not Used (Fixed at “0”) 

 

 

- 

- 

- 

- 

- 

- 

- 

- 

0 

Fixed 

at 

“0” 

 

-  - - - - - - - - 

 
  <Printer status 3  Error Information (Fifth Byte)> 

Bit Contents 

Status 

Model 

Compatability 

  

“0” 

“1” 

TSP800 TSP700 TSP600 TUP900 TSP1000 

TSP828L TSP700II

TSP650 

7 

Fixed 

at 

“0” 

 

-  - - - - - - - - 

6 Receive 

Buffer 

Overflow 

No 

Yes  OK OK OK OK OK OK OK OK 

5 

Command Error (in Page 
Mode) 

No Yes 

OK No No No No NO NO NO 

4 

Fixed 

at 

“0” 

 

-  - - - - - - - - 

3 

BM 

Error 

No 

Yes  No No No OK OK OK* OK NO 

2 

Presenter Paper Jam Error 

No 

Yes 

No 

No 

No 

OK 

No 

NO 

NO 

NO 

1 

Head 

Up 

Error 

No 

Yes  No No No No No NO NO NO 

0 

Fixed 

at 

“0” 

 

-  - - - - - - - - 

• Receive Buffer Overflow 
Overflow errors cleared to 0 when returned to host.  
• Command Error (in Page Mode)   
Command errors cleared to 0 when returned to host. 
• BM Error 
On models that use a common PE and BM sensor, if a continuous error is detected beyond a determined amount, it 
indicates not a black mark error, but a paper out error.   
(*) TSP828L (Label Printer) BM errors occur for the following reasons.  

Summary of Contents for Line Thermal Printer






















































































































































































Reviews:

No comments