―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
3-23
ESC C 0 n
[Name] Set page length to n x 24 mm units
[Code]
ASCII ESC
C
0 n
Hex.
1B
43
00 n
Decimal 27
67
0 n
[Defined Area]
1
≤
n
≤
22
[Initial Value]
(Form feed amount initial value x 42)
[Function]
The position whereat this command is processed is considered the top of the page and sets the
page length to (n x 24 mm).
This command cancels the bottom margin setting when setting page length.
The page length set using this command is unaffected by changing the form feed amount later.
Moving to the top of the page is performed using the following commands.
• Form feed command (FF):
Executes a form feed.
• Cutter command (ESC d n):
Sets cutter position at top of page.
• Raster command (ESC * r B):
Sets top of page when quitting raster mode.
• Error cancel operations:
Sets position when quitting error cancellation operations
at top of page.
