Star Micronics 347F, User Manual, Page: 7 / 63

– 5 –
2. LOADING THE PAPER
2-1. SP317
1 Turn the power switch on the printer
to the off position.
2 Set DIP switch 2-4 to match the
width of the paper that is being used.
(Refer to Installation Manual for
DIP switch settings.)
(All the switches in the DIP switch
array are factory preset to the “ON”
position.)
3 To remove the rear cover lift it up
approx. 3cm and push it backwards.
4
Dependant on the width of the paper
(2.25 or 3 inches), align the roll
paper holders at the specified posi-
tion .
Fig. 2-2 Mounting the roll paper holders
(SP317)
Fig. 2-1 Removing the rear cover
(SP317)
DIP
switches
ON OFF
2-4
3.25 inches
2.25 inches
3.0 inches
ENGLISH