-4-
Park Kill Input Polarity
The Park Kill (Cutout) Input turns off any siren tone output when activated, and
remains off until a control is activated or changed. The wiring diagram on page 11
shows two connection examples.
The park kill input is normally activated by connecting to positive. To activate by
connecting to ground (negative), move the “PKILL” option jumper from the “Pos.
Switching” pins to the “Neg. Switching” pins in the amplifier unit. (See Amplifier
diagram below).
Alternate Magnum Tones
The Magnum feature allows the two speakers to either have two different siren tones
at the same time, or can offset the same tone from one speaker to the other. This
sound simulates two separate vehicles and allows maximum attention getting
ability.
For those end users who prefer to have the Magnum feature default using two
different tones every time it is utilized, and option jumper is provided on the back of
the control head. To select the alternate Magnum tones, remove the first option
jumper from the back of the control head. (See diagram to the right). For full
description of tones, see the OPERATION section on pages 11 to 14. .
(Installer Selectable Options CONT’D)
