15
Functions of Controls
Power Key:
The power key is used to switch on the electrical system of the vehicle.
To engage the motor and start the vehicle, insert the key and turn it clockwise to
the ON position. At this time the 12V accessory system (headlights, turn signals,
taillights, brake lights and horn) will be engaged too. To switch the power off, turn
the key counterclockwise to the OFF position.
CAUTION:
When the key is in the ON
position, it cannot be pulled out. DO NOT try to remove the key when it is in the ON
position.
Forward/Reverse Switch:
This is a three-position switch. The switch is used to shift
the golf car into forward or reverse. Press the switch up to move forward, down for
reverse, or in the middle for neutral.
WARNING:
This switch must be fully pressed
into the proper position or the electric system and motor will be damaged.
NOTE:
The buzzer will beep when the lower part of this switch is pressed to warning
people around your vehicle.
Accelerator Pedal:
The accelerator pedal is used to control speed while driving.
Press it down slowly to increase speed. The vehicle will speed up with the gradual
depression of the accelerator pedal, eventually reaching top speed when the pedal
is completely pressed down. The vehicle slows down with the lifting of the pedal.
When the pedal is fully lifted, the electric brake will engage and the vehicle will
come to a stop.
Service Brake Pedal:
The service brake pedal is used for braking. The shape of
the pedal of the mechanical brake system and the hydraulic brake system is differ-
