38
Operating instructiOns
Temperature too high.
●
Tip temperature too high?
Reset the temperature.
●
check temperature correction settings of soldering iron?
See: „Temperature Correction”.
●
refer to the service manual.
Filaments at solder tip or solder joint.
●
Tip temperature too high?
Reset to appropriate lower temperature.
●
Is solder tip clean?
„Maintenance of solder tips“.
Tip temperature too low.
●
Is solder tip clean and free of oxides?
See: „Maintenance of solder tips“.
●
check temperature correction settings of soldering iron?
See: „Temperature Correction“.
Display shows
H-E
.
●
Is the soldering iron cord damaged?
Replace soldering iron.
●
Is the soldering iron equipped with a solder tip?
Fit an appropriate tip.
●
refer to the service manual.
Summary of Contents for INDUSTA HF
