STANNOL INDUSTA HF, Operating Instructions Manual

Page: 30 / 82

30
Operating instructiOns
pArAmeTer SeTTINg
password settings
The original soldering station password: „000", soldering station temperature setting is allowed in
this state, should limit temperature adjustment, you must modify the password.
enter modifying password mode
●
Switch off soldering station.
●
Press and hold
+
and
-
buttons and switch on the station ( C is flashing in the Display).
Input original password
●
Press “*” button (
---
will be displayed, first digit is flashing)
●
Input first digit of the password using
+
or
-
button and press * button ( second digit will be
flashing).
● Input second digit of the password using
+
or
-
button and press * button ( third digit will be
flashing).
●
Input third digit of the password using
+
or
-
button and press * button.
Input wrong password
●
The display will return to show the temperature and you have to repeat the procedure.
Input right password
● If the display shows O.R. which indicates that the entered password is correct
●
Waiting for about 4 seconds soldering station will return to normal working condition.