STANNOL INDUSTA HF, Operating Instructions Manual

Page: 31 / 82

31
operATINg INSTrUcTIoNS
Input new password
● While display shows O.R. press the
*
key, button (
---
will be displayed, first digit is flashing).
● Input first digit of the new password using
+
or
-
button and press * button ( second digit will
be flashing).
●
Input second digit of the new password using
+
or
-
button and press * button ( third digit
will be flashing).
● Input third digit of the new password using
+
or
-
button and press * button.
●
If you input an unchanged password, the soldering station returns to normal operation.
Input new password again (same as above!)
●
---
is displayed, first digit is flashing.
●
Input first digit of the new password using
+
or
-
button and press * button ( second digit will
be flashing).
● Input second digit of the new password using
+
or
-
button and press
*
button ( third digit
will be flashing).
●
Input third digit of the new password using
+
or
-
button and press * button.
If you have re-entered a wrong password, you have to repeat from “Input new Password”.
password protection activation
●
The Soldering station is returning to operation mode. Now you are able to setup the tempera-
ture setting ( see chapter: Temperature setting).
● After setting up the temperature switch the soldering station on and off again. The password
protection is now activated and cannot be changed by the user.
●
For changing the temperature refer Temperature setting.
To remove password protection renter “000” as a password.