Midilift SL
Installation Guide
October 2016
Version 9
9
2.4 Shaft panels
Slide the shaft panels and ‘H’ sections between the corner uprights. Fit horizontal members
and secure with M8 fixings.
Note: ram support horizontal member is identifiable by 2
fixing holes which must be positioned off to the left by 50mm.
Move lift (if required) into its final position, check for level and square-ness. Packers maybe
used under the corner uprights and base plate to achieve this.
A
dim A
dim B
dim A = dim B
If required add packers to level lift
(1.2 & 3.0mm are available)
Squareness check
View A
Ensure Horizontal member is fitted
50mm offset to the left
