Midilift SL
Installation Guide
October 2016
6
GUIDE END STOP
Once lift has been built up as far is possible from the ground floor and using the working
platform, the lift is almost in a position to be run.
To ensure that the platform isn’t driven past the end of the guides during installation the
ultimate limit ramp should be positioned 2
switch tested. If further sections of guide are to be added this process needs to be repeated.
Left hand guide.
(viewed from platform).
Version 9
IMPORTANT
HEALTH & SAFETY
THIS PROCEDURE MUST BE
ADHERED TO
GUIDE END STOP
as far is possible from the ground floor and using the working
platform, the lift is almost in a position to be run.
To ensure that the platform isn’t driven past the end of the guides during installation the
ultimate limit ramp should be positioned 200mm from the top of the guides and the limit
switch tested. If further sections of guide are to be added this process needs to be repeated.
Ultimate Limit
Ultimate Limit Switch
Left hand guide.
(viewed from platform).
28
IMPORTANT!!
HEALTH & SAFETY
THIS PROCEDURE MUST BE
ADHERED TO
as far is possible from the ground floor and using the working
To ensure that the platform isn’t driven past the end of the guides during installation the
0mm from the top of the guides and the limit
switch tested. If further sections of guide are to be added this process needs to be repeated.
Ultimate Limit Ramp
