Midilift SL
Installation Guide
October 2016
Introduction
The intention of this document is to provide
Stannah Midilift SL, highlighting key points and safety procedures and to ensure that the final
product runs safely, smoothly and efficiently.
This manual should be read in conjunction with th
General Arrangement Drawing and the Builder's Work Drawing.
Working on lifts can be dangerous and therefor
essential. British Standard BS7255 (2001 Code of Practice
recommends safe practices for those working on all types of lifts and should be referred to for
guidance.
This manual is for guidance only. Ow
the right to alter the contents without prior
Hazards identified during the installation of this product are, but not limited to:
•
Working at height
•
Manual handling
•
Contact with electricity
•
Contact with substances hazardous to health
•
Entanglement
Please ensure that the installation is
system of work followed
The following PPE should be worn at all times during installation:
Safety gloves
Safety goggles
Version 9
The intention of this document is to provide information for the correct installation of
Stannah Midilift SL, highlighting key points and safety procedures and to ensure that the final
product runs safely, smoothly and efficiently.
This manual should be read in conjunction with the electrical wiring manual, the
General Arrangement Drawing and the Builder's Work Drawing.
Working on lifts can be dangerous and therefore safe practices for all those
essential. British Standard BS7255 (2001 Code of Practice for Safe Work
recommends safe practices for those working on all types of lifts and should be referred to for
This manual is for guidance only. Owing to our policy of continual improvement we reserve
the right to alter the contents without prior notice.
Hazards identified during the installation of this product are, but not limited to:
Contact with substances hazardous to health
Please ensure that the installation is suitable planned and any risk assessment and safe
The following PPE should be worn at all times during installation:
Safety goggles
Safety helmet
NOTE: Heavy equipment. Some components and
sub-assemblies are heavy and appropriate
precautions must be taken to
avoid
lifting or moving them. Sub-assemblies are marked
with their corresponding weight prior to delivery of
the equipment.
4
or the correct installation of the
Stannah Midilift SL, highlighting key points and safety procedures and to ensure that the final
iring manual, the specific
e safe practices for all those working on lifts is
for Safe Working in Lifts)
recommends safe practices for those working on all types of lifts and should be referred to for
improvement we reserve
Hazards identified during the installation of this product are, but not limited to:
suitable planned and any risk assessment and safe
Safety shoes
ome components and
lies are heavy and appropriate
avoid injury when
assemblies are marked
ing weight prior to delivery of
