Stanley SCSS-700VS, Installation & Operation Manual

Page: 70 / 74

VIP-Series Voice Integration Package Installation/Operation Manual
4-6 53796
2. Connect the PC to the VIP-VCM using a standard 9-pin serial cable. See Figure 4-5.
Figure 4-5 Serial Cable Connections
3. Run the 7780 software.
4. Select the appropriate COM port that you are using.
5. Press the "Capture Panel" button. (A capture dialog will appear on the screen.)
6. Enter programming mode on the main control panel.
7. Select option 9.
8. Select option 1.
9. The "Capture" dialog should disappear after the PC-panel connection is established.
10. Select "Read from Panel" to read a message and store onto your hard drive, or "Write to
Panel" to transfer a .SKE formatted message to the panel.
11. Select the appropriate message location you wish to read/write.
12. Enter the file name you wish to transfer (Press "Browse" to display a list of files.)
13. Press "Start" to start the transfer.
14. When transfer is completed, press "Release Panel".
15. Exit programing on the main control panel.
16. Remove 9-pin serial cable.