Stanley SCSS-700VS, Installation & Operation Manual

Page: 68 / 74

VIP-Series Voice Integration Package Installation/Operation Manual
4-4 53796
4.2.1 Input User Message 3 From the Aux Audio Input
Follow these steps to input user message 3 into the VIP-VCM:
Note: Refer to the FACP’s installation manual section 7 for detailed programming information.
1. Wire a speaker cable with 1/8” mini plug (Radio Shack Cat. No. 42-2454) to Aux Audio
GND and IN terminals. Refer to Figure 4-3.
Figure 4-3 Aux Audio Connection for Recording
2. Plug the mini plug into the Line Out/Headphone jack on a PC or Laptop. See Figure 4-3.
3. Enter programming mode at the main control panel.
4. Select option 9
VIP-VCM Maint
.
5. Select option 2
Local Recording
.
6. Select which module you wish to have the playback from.
7. Select the circuit on the selected module you wish the playback to be from.
8. Press switch 2 and start playing the audio file from your PC at the same time.
See Figure 4-4.
Figure 4-4 Recording Options Window of FACP
Note: If a message is already stored in user message 3 memory location, then the message played on the aux
audio channel will only play and not record when switch 2 is pressed. See Table 4-2.
9. When the audio file from the PC is finish playing press switch 2 again.
Plug in here
This is a menu of
what the VIP-VCM
switch functions
look like.