10 ► PBCC
65 User Manual
Problem
Solution
The head pin won’t fit through the hole in the cutting
head.
Press and hold the pressure release. Ensure the
two halves of the cutting head are aligned. Close the
cutting head and insert the head pin.
The tool won’t cut when I press the trigger.
Ensure the battery is charged. Disengage the trigger
lock.
The InteLED flashes yellow when I activate the tool.
The maintenance interval is about to elapse. Have the
tool serviced as soon as possible.
The tool repeatedly give me bad cuts / The InteLED
flashes red after every crimp.
Ensure the battery is fully charged. Ensure the blades
are in good condition. If problem persists, have the tool
serviced as soon as possible.
The tool is leaking hydraulic oil.
Have the tool serviced immediately.
TROUBLESHOOTING
Summary of Contents for PBCC65
Page 2: ......
