GW1200 Gateway Installation & Configuration Guide
27
4.
Fasten the Adaptor to the Screws (F) by tightening Nuts (G) to their final position
using a 7/16" Nut Driver.
5.
Mount the Exciter onto the Mounting Adaptor (A).
Figure 10: Correct Complete Mounting Position
Mounting the Gateway on a Wall
While not normal practice, there may be occasions, particularly in older facilities where
the ceilings are already congested, when wall mounting of the GW1200 Gateway may be
the only viable option.
The Gateway is shipped with a mounting template which can be used to measure the
holes for mounting the Gateway on a wall. See Figure 11. The mounting plate supplied
with the Gateway is not required for wall mounting.
