GW1200 Gateway Installation & Configuration Guide
28
Figure 11: GW1200 Gateway mounting template (supplied with the Gateway)
1.
Hold the template on the wall in the location you wish to mount the Gateway.
Make sure the template is level.
2.
Mark the four holes for the screws through the template.
3.
Remove the template.
4.
Drill the holes for the screws.
5.
Anchor the screws into the wall, leaving 10mm of each of the screws exposed. Use
appropriate screws and or anchoring plugs.
6.
Mount the Gateway with the STANLEY Healthcare logo facing up, onto the 4 screws.
The Gateway's back panel has 4 mounting brackets for this purpose.
