background image

GT18B01-B02 

User

 Manual ◄ 19

Engine: ....................................................................................................................................................18 hp Briggs 

Capacity................................................................................ One 5 gpm/19 lpm Circuit or One 8 gpm/30 lpm Circuit

Length:................................................................................................................................................ 36 in. / 91.4 cm

Width: ................................................................................................................................................. 23 in: / 58.4 cm

Height: .............................................................................................................................................. 29.5 in. / 74.9cm

Weight (Wet):  Single Circuit Briggs ................................................................................................330 lbs / 149.6 kg

Fuel Tank Capacity: ........................................................................................................................... 5.5 gal. / 20.8 ltr

Estimated Gas Consumption Per Hour ................................................................................................... 1.3 gal / 4 ltr

Hydraulic Reservor Capacity: .................................................................................................................. 3 gal. / 11 ltr

Relief Valve "crack" setting

 ............................................................................................................. 2100 psi / 145 bar

Max relief setting ............................................................................................................................ 2500 psi / 172 bar

HTMA/EHTMA Category ........................................................................................................................ Type 1 and 2

Nominal Pressure ............................................................................................................................. 1500 psi/103 bar

Max Pressure ................................................................................................................................... 2000 psi/138 bar

Guaranteed Sound Power Level ................................................................................................................... 101 dBA

Measured Sound Power Level ........................................................................................................................ 99 dBA

Vibration Level ....................................................................................................................................................... N/A

POWER UNITS,TRACHORSE & GAS/FUEL DRIVEN EQUIPMENT: A1. Federal Emission Component Compliance 

40CFR part 1060.120 Stanley warrants all fuel system emission components for 2 years from the date of original pur-

chase provided there has been no abuse, neglect, modifi cations, or improper maintenance.

Components covered. The emission-related warranty covers all components whose failure would increase the evapora-

tive emissions. Your emission-related warranty does not cover components whose failure would not increase evapora-

tive emissions. Coverage under this warranty extends only to the following parts; fuel tank, fuel cap, fuel hose and vapor 

hose from the fuel tank to the engine and any connectors that are apart of the fuel system.

The equipment is designed, built, and equipped so it conforms at the time of sale to the ultimate purchaser and each 

subsequent purchaser and is in compliance with 40 C.F.R. 1060.120 standards. The equipment is free from defects in 

materials and workmanship that may keep it from meeting these requirements.

SPECIFICATIONS

Summary of Contents for GT18B01



























Reviews: