background image

5. 

Perform ECO Pro Closeout Procedure

 

5.1 

Remove the LCD Screen protector

          5.2    Verify the door is being controlled by the ECO Pro

 

 

5.2.1  From the Home Screen, use Up/Down Arrow keys to change the operating mode of the

 

 

 

door from “Automatic” to “Closed Locked.”  Verify door goes to “Closed Locked.”  Use 

 

 

 

Up/Down Arrow keys to change operating mode back to “Automatic.” Verify door returns 

 

 

 

to “Automatic” operation.

 

5.3 

Refer to Attachment 6 “Quick Start Manual.”

 

 

5.3.1   Remove Attachment 6 and review basic operation of ECO Pro with the facility owner or    

 

 

 

person overseeing the daily operation of the door.

4.3.3  Set Traffic Sense.

 

Enabling Traffic Sense allows the ECO Pro to temporarily switch the operating mode from 

Reduced to Automatic (or Reduced Oneway to Oneway)  during periods of high traffic.  When traffic 

returns to lower levels, the operating mode automatically returns to reduced.  Traffic Sense is 

disabled by default and the Traffic Sense Level is set to Off by default.

•  From the Function Menu, arrow to “Traffic Sense” and press “Select.”

•  Arrow to either “Enabled” or “Disabled” and press “Select” to save.

4.3.2  Set Hold Open Mode.

 

Hold Open Mode allows for ECO Pro to use two different methods of Hold Open.  “Normal” 

Hold Open Mode is the standard method of keeping the door open permanently.  “Timed” Hold 

Open Mode allows the user to select a timed Hold Open selection which keeps the door open for 15 

minutes, 30 minutes, 45 minutes or permanently.  Once the selected Hold Open time is expired, the 

doors will return to previous operating mode.  Hold Open Mode is set to “Normal” by default.

•  Arrow to either “Normal” or “Timed” and press “Select” to save.

•  From the Function Menu, arrow to “Hold Open Mode” and press “Select.”

PRESS 

PRESS 

SEE

OR

Traffic Sense:
Enabled

Traffic Sense:
Disabled

 

END 

Hold Open Mode:
Normal

PRESS 

PRESS 

SEE

OR

Hold Open Mode:
Timed       

     

END 

Note:

  

Traffic Sense Level is adjusted in the main menu.  The user must select a reduced 

operating mode to utilize Traffic Sense.  

PRESS 

SEE

PRESS 

Hold Open Mode

 

FUNCTION MENU

START

PRESS 

PRESS 

SEE

Traffic Sense

FUNCTION MENU

START

204082

Rev B 10/11/2012

Page 7 of 12

© 2012, STANLEY BLACK & DECKER. ALL RIGHTS RESERVED.

Summary of Contents for ECO Pro













Reviews: