Stanley DL09150, User Manual

Page: 5 / 17

The SAFETY TAG, P/N 15875, shown at right, smaller
than actual size, is attached to the tool when shipped
from the factory. Read and understand the safety
instructions listed on this tag before removal. We
suggest you retain this tag and attach it to the tool
when not in use.
A model sticker is attached to the tool. Never exceed the flow and pressure levels specified on this
sticker. The information listed on the model sticker must be legible at all times. Replace this
sticker if it becomes worn or damaged. A replacement is available from your local Stanley
distributor.
DL09
Tool Decals & Tags
5
DANGER DANGER
1. FAILURE TO USE HYDRAULIC HOSE
W H E N U S I N G
HYDRAULIC TOOLS ON OR NEAR ELECTRICAL LINES
MAY RESULT IN DEATH OR SERIOUS INJURY.
BEFORE USING HOSE
ON OR NEAR ELECTRIC LINES.
BE SURE THE HOSE IS . THE
HOSE SHOULD BE REGULARLY TESTED FOR ELECTRIC CURRENT
LEAKAGE IN ACCORDANCE WITH YOUR SAFETY DEPARTMENT
INSTRUCTIONS.
2. A H Y D RAU L I C L E A K O R B U R S T M AY C AU S E O I L
INJECTION INTO THE BODY OR CAUSE OTHER SEVERE PERSONAL
INJURY.
A. D O N O T E X C E E D S P E C I F I E D F L O W A N D
PRES SURE FOR THIS TOOL. EXCES S FLOW OR
PRESSURE MAY CAUSE A LEAK OR BURST.
B. D O N O T E X C E E D R AT E D W O R K I N G P R E S S U R E
O F H Y D RAU L I C H O S E U S E D W I T H T H I S T O O L .
E X C E S S P R E S S U R E M AY C A U S E A L E A K O R
BURST.
C. C H E C K T O O L , H O S E , C O U P L E R S &
C O N N E C T O R S D A I L Y F O R
L E A K S . D O N O T F E E L F O R L E A K S W I T H
Y O U R H A N D S . C O N TA C T W I T H A L E A K M AY
RESULT IN SEVERE PERSONAL INJURY.
LABELED AND
C E R T I - F I E D A S N O N - C O N D U C T I V E
LABELED AND CERTIFIED AS
NON- CONDUCTIVE
MAINTAINED AS NON- CONDUCTIVE
D. DO NOT LIFT OR CARRY TOOL BY THE HOSES. DO NOT ABUSE
HOSE. DO NOT USE KINKED, TORN OR DAMAGED HOSES.
3. M A K E S U R E H Y D R A U L I C H O S E S A R E P R O P E R LY
CONN-ECTED TO THE TOOL BEFORE PRESSURIZING
SYSTEM. SYSTEM PRES SURE HOSE MUST ALWAYS
B E C O N N E C T E D T O T O O L “ I N ” P O R T. S Y S T E M
RETURN HOSE MUST ALWAYS BE CONNECTED AT
TOOL “OUT” PORT. REVERSING CONNECTIONS MAY
C A U S E R E V E R S E T O O L O P E R AT I O N W H I C H C A N
CAUSE SEVERE PERSONAL INJURY.
4. D O N O T C O N N E C T C LO S E D - C E N T E R T O O L S T O
O P E N - C E N T E R H Y D R A U L I C S Y S T E M S . T H I S M AY
C AU S E E X T R E M E S Y S T E M H E AT A N D / O R S E V E R E
PERSONAL INJURY.
DO NOT CONNECT OPEN-CENTER TOOLS TO C LO S E D - C E N T E R
HYDRAULIC SYSTEMS. THIS MAY RESULT IN LOSS OF OTHER
HYDRAULIC FUNCTIONS POWERED BY THE SAME SYSTEM AND/OR
SEVERE PERSONAL INJURY.
5. B Y S TA N D E R S M AY B E I N J U R E D I N Y O U R W O R K
AREA . KEEP BYSTANDERS CLEAR OF YOUR WORK
AREA.
6. WEAR HEARING, EYE, FOOT, HAND AND HEAD PROTECTION.
7. TO AVOID PERSONAL INJURY OR EQUIPMENT DAMAGE, ALL TOOL
REPAIR, MAINTENANCE AND SERVICE MUST BE
PERFORMED BY AUTHORIZED A N D P R O P E R LY
TRAINED PERSONNEL.
IMPORTANT IMPORTANT
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE
OPERATION MANUAL.
TAG TO BE REMOVED ONLY BY TOOL
OPERATOR.
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE
OPERATION MANUAL.
TAG TO BE REMOVED ONLY BY TOOL
OPERATOR.
(517) (517) 15875 15875
SEE OTHER SIDE SEE OTHER SIDE
(Not used on all models)
28323
“CE” Decal
15211
Danger Sticker
For proper and safe operation read owners manual
and make sure that you have been properly trained in
correct procedures required for work on or around
electric lines.
ELECTROCUTION
HAZARD
Failure to use hydraulic hose labeled and certified as
non-conductive when using hydraulic tools on or
near electric lines may result in death or serious
injury.
7-10 GPM/ 24-36 LPM
DO NOT EXCEED 2000 PSI/ 140 BAR
n n
n
n
n
n
n
DO NOT EXCEED SPECIFIED FLOW OR PRESSURE. USE CLOSED-CENTER
TOOL ON CLOSED-CENTER SYSTEM. USEOPEN-CENTER TOOL ON OPEN-
CENTER SYSTEM. CORRECTLY CONNECT HOSES TO TOOL "IN" AND "OUT"
PORTS. IMPROPER HANDLING, USE OR MAINTENANCE OF TOOL COULD
RESULT INA LEAK, BURST OR OTHER TOOL FAILURE. CONTACT AT A LEAK
OR BURST CAN CAUSE OIL INJECTION INTO THE BODY. FAILURE TO
OBSERVE THESE PRECAUTIONS CAN RESULT IN SERIOUS PERSONAL
INJURY.
DANGER
Model No.
DL09
Stanley Hydraulic Tools
3810 SE Naef Rd
Milwaukie, Oregon 97267
15-45 lpm/4-12 gpm
140 bar/2000 psi
®
28769
DL09 Model Sticker
29149
Rotation Direction Sticker
30Lpm at 138bar
BHTMA CATEGORY
11207
Circuit Type “D” Decal
RPM Sticker
29148
28788
Manual Sticker
(CE Models only)
(Not used on all models)
(Not used on all models)
(Not used on all models)