BODY ASSEMBLY
•
Fit Head Vice Jaw* to Head
63
and use soft jaws to hold the Head Vice Jaw in the inverted orientation.
•
Fit Body
65
on to Head
63
.
•
Apply Loctite® 243* to thread of Handle Retaining Nut
34
and wind on to Handle
63
using Handle Retaining Nut
Wrench* to tighten.
•
Apply Loctite® 243* to thread of Air Piston Rod
58
and wind Air Piston Connector
41
on to Air Piston Rod. Tighten using
4mm A/F Allen key in Air Piston Rod and 14mm A/F spanner on Air Piston Connector.
•
Fit Quad Seal
9
and Force Reduction Seal
35
to Air Piston
33
.
•
Insert Air Piston
33
into Body
65
until it fits on to Air Piston Connector
41
.
•
Apply Loctite® 243* to thread of Air Piston Connector
41
. Tighten Nut
3
using 27mm A/F Spanner with 14mm A/F
spanner or 5mm A/F Allen key on Air Piston Connector to prevent rotation.
•
Fit 'O' Ring
8
on to Base Plate
32
.
•
Insert Base Plate
32
into Body
65
and install Retaining Ring
24
.
•
Thoroughly clean Silencer
37
or renew if worn. Fit Silencer to Base Cap
31
and install Retaining Ring
25
.
•
Place Gasket
36
on to Base Cap
31
and fit on to Body
65
.
•
Screw Locknut
38
on to Base Plate
32
using Locknut Socket* to a minimum torque of 60Nm. If necessary, use a 10mm
A/F Allen key to prevent rotation of Base Plate. Outer face of Locknut
38
must be flush with or below the surface of the
Base Plate
32
threaded spigot.
OPERATING VALVE
•
Fit 2 'O' Rings
10
into Valve Body
42
and
2
'O' Rings
11
on to Valve Body.
•
Insert Valve Body
42
into Body
65
.
•
Fit 2 'O' Rings
11
on to Valve Spool
39
.
•
Insert Valve Spool
39
into Body
65
.
•
Fit 'O' Ring
7
to Valve Retainer
40
.
•
Apply Loctite® 243* to thread of Valve Retainer
40
and use 6mm A/F Allen key to install Valve Retainer into Body
65
.
•
Fit 2 'O' Rings
4
on to Swivel Bolt
44
.
•
Fit Swivel
43
on to Swivel Bolt
44
.
•
Apply PTFE Tape to thread of Swivel Bolt
44
and using 22mm A/F spanner or socket, wind Swivel Bolt into Body
65
.
•
Fit Adaptor
48
, Adaptor Ring
50
, Retaining Nut
49
and Deflector
47
.
* Refers to items included in 73200 Service Kit. For complete list see page 17.
Item numbers in
bold
refer to the General Assembly drawing and parts list (pages 21 – 22).
20
ENGLISH
ORIGINAL INSTRUC TION
Summary of Contents for Avdel 73200
