Stanley Avdel 73200, Instruction And Service Manual

Page: 12 / 96

4.2 STANDARD NOSE ASSEMBLY SELECTION
The fasteners below can also be placed on the 73200 tool. It is essential that the correct nose assembly is fitted prior to
operating the tool.
STANDARD NOSE ASSEMBLY SELECTION
FASTENER NOSE EQUIPMENT
NAME Ø DESCRIPTION PART NO.
AVBOLT® 3/16" (4.8mm) Refer to 07900-00905 datasheet 07220-08100
1/4" (6.4mm) Refer to 07900-00905 datasheet 07220-07500
AVSEAL® II 11mm Standard For Nose Tip selection refer to 07900-00840 datasheet 07220-06600
12mm Standard For Nose Tip selection refer to 07900-00840 datasheet 07220-06700
13mm Low Pressure For Nose Tip selection refer to 07900-00840 datasheet 07220-06600
14mm Low Pressure For Nose Tip selection refer to 07900-00840 datasheet 07220-06700
16mm Low Pressure For Nose Tip selection refer to 07900-00840 datasheet 07220-06800 ∆
INTERLOK® 3/8” (10mm) Standard straight equipment 73200-04500 †
MAXLOK® 1/4” (6.4mm) Standard straight equipment *07610-02100
3/16” (4.8mm) Standard straight equipment *07610-02000
MONOBOLT® 3/8" (10mm) Standard Nose Tip 07220-07200 †
∆ Air inlet pressure of 7.0 bar required.
† Two tool actuations are needed to place these fasteners.
* It is necessary to use adaptor kit (part number 73200-04300) to fit these nose assemblies to the tool.
4.3 FITTING INSTRUCTIONS
CAUTION:
The air supply must be disconnected when fitting or removing nose assemblies unless specifically
instructed otherwise.
Nose assemblies must be pre-assembled before fitting.
STRAIGHT HORIZONTAL, VERTICAL OR ROUND NOSE ASSEMBLIES
• Lightly coat the jaws with Moly Lithium grease.
• Assemble Spring Guides 4 and Spring 5
• Balance the three Chuck Jaws
3
on the upper Spring guide
4
(using a spent pintail to aid positioning if necessary)
• Carefully lower Chuck Collect 2 over the assembled components
• Insert Spacer
6
(if required) into Chuck Collet 2 (5/16” dia only)
• Assembly can then be located in anvil
Item numbers in
bold
refer to the drawing opposite.
Fig. 4
12
ENGLISH ORIGINAL INSTRUC TION