Installation & Operating Manual for Argon F650 & F900 – Balanced Flue Gas Stoves
8
Natural Gas & LPG Models
Mandatory Requirement - Fitting the Rear Chain
The chain can either be fitted to the right hand side or the left hand side of the stove at the rear
Step 1 -
You are required to fit this chain regardless of whether you
flue out the top of the stove or out the rear of the stove it is a
mandatory requirement to be installed correctly
Unscrew the top bolt that holds on the rear panel and bolt on the
chain provided using the washer so the chain is fixed securely to the
back of the stove
Step 2 -
Set the distance you
require at the rear of the stove
Adjust the length of the chain by
moving the snap hook into a
different link to shorten the chain if
required
Step 3 -
Diagram of eye hook fitted into rear wall
- Drill the rear
wall directly behind and in a straight line with the bolt holding the
chain to the rear of the stove, with a suitably sized masonry drill to
the correct depth to match the rawlplug provided, then fit the
rawlplug & screw the eye hook into the wall. If you are fitting the
hook into a plasterboard wall you will need a different fixing which is
not provided. Ensure the hook is solid and secure in the wall so it
will take a weight greater than 150kgs but a maximum of 250kgs
Clip the snap hook onto the eye bolt in the wall insuring the chain is
at the right length so it is straight but not over tight but not loose
Now this chain is fitted it will prevent the stove tipping forward when
front door is open
