Installation & Operating Manual for Argon F650 & F900 – Balanced Flue Gas Stoves
46
Natural Gas & LPG Models
3.9 Receiver/Controller Unit
Picture 1
– Shown Receiver / Controller Unit
Picture 2
– Showing receiver unit being fitted into the
Heat shield pocket
– be careful not to pull any wires out of their multi-plug sockets as shown in the white
circles
Picture 3
– Showing the receiver unit fully
fitted into the Heat Proof pocket holder
Pictures shows receiver unit
with the Battery lead jack plug
fitted
– see white circle
The receiver which is the controller for the
stove is the black box with wires going into
it and it is held in place inside a heatproof
silver pocket at the rear of the stove, directly
behind the battery box holder
Only the Gas safe / rgii engineer needs to
remove this receiver unit if required
The receiver has a wiring loom connected
to it which goes back to the GV60 control
valve underneath the burner unit
If the engineer needs to remove the
receiver unit please be careful that none of
the small multi plugs are pulled out from
either the receiver or the GV 60 control
valve
PLEASE NOTE – DO NOT FIT BATTERIES
INTO THE RECEIVER UNIT, AS THIS WILL
DAMAGE IT PERMANENTLY AND VOID
YOUR WARRANTY
