GB & IE version
19
2.4 Manual Turn OFF
Gas Isolation Valve -
To turn the gas off to the stove if you are not using it for a long period of time,
please use the gas isolating ON/OFF valve that your fitter would have installed when the stove was
fitted. This
Gas Isolation Valve
is not part of the components we supply with the stove, your installer will
supply this. Please note it must have a gas pressure test point built into the valve
If fitted the option Battery Pack
- In the event that the appliance needs to be turned
OFF
manually, for
instance, if the remote control is lost or the batteries become totally flat, or you are not going to use the
stove for an extended period of time, the battery pack can be accessed and the switch flipped to the
OFF
position and remove the batteries
The picture below shows the battery box and then an enlarged picture of the
ON/OFF
SWITCH on the
battery box, this is located at the back of the stove in the pocket at the bottom.
Please make sure the
switch is in the ON position and the jack plug connected in fully when you wish to use the stove
Above pictures shows the Battery box and lead
Battery Box ON/OFF Switch shown in white circle
Battery Usage
The control system on this stove is called Symax 2 - which is a by-directional system so even when the
stove is turned off the receiver in the stove (the Brain) and the remote control are talking to each other
every 60 seconds so even when you have not used the stove for a period of time, unless the battery
pack has been turned off the batteries can run down because the receiver in the stove has been
communicating with the remote control every 60 seconds
