21
3.
Download the
myfire
App from Apple App
Store or Google Play Store.
4.
Start App setup.
5.
Choose language, temperature (Celsius or
Fahrenheit) and time format (12 or 24 hour).
6.
Complete the registration process and Login
to the App.
7.
Touch the + icon and a message will tell you
to go to your smart device Wi-Fi settings.
8.
Touch myfire_WiFi-Box_<number>.
9.
Enter the password “MYFIREPLACE”.
10.
Select a name for your stove.
11.
Type in the name (SSID) of your Wi-Fi router.
12.
Type in the password of your Wi-Fi router.
13.
Touch “Connect” button.
14.
After successful connection a pop-up will tell
you to go to your smart device Wi-Fi settings.
Touch “OK” if the settings are correct.
15.
After confirming fireplace settings touch
“Finish”.
16.
Touch “Start App” to finish the installation &
setup process.
NOTE:
If any of the Automatic Operation
Modes are activated using the App,
“APP” will be displayed on the
Remote Control.
For further instructions & video on how to set-up the
myfire
App, see http://myfireapp.com/en/setup/.
CLEANING
Cleaning should be done when the stove is cold by
removing any dust or dirt using a dry cloth. Do not
use any water on the matt black finish as this will
cause it to discolour. It is recommended to clean the
stove of any dust & debris regularly and especially if
the stove has not been used for some time.
MAINTENANCE
This stove must be inspected and serviced once
a year by a qualified/competent Gas Engineer.
CO ALARM
The fitting of CO Alarms in the same room as the
appliance is a compulsory requirement under cur-
rent Building Regulations. For ROI an additional CO
Alarm must be fitted either inside each bedroom or
within 5 metres of the bedroom door, refer to
Building Regulations Part J. Further guidance on the
installation of a carbon monoxide alarm is available
in BS EN 50292:2002 and from the alarm manufac-
turers instructions.
WARNING NOTE:
Properly installed, operated and maintained this
stove will not emit fumes into the dwelling. In the
event of a gas escape or if you can smell gas then
the following immediate action should be taken:
(a) Immediately turn off the gas supply at the
meter/emergency control valve.
(b) Extinguish all sources of ignition.
(c) Do not smoke.
(d) Do not operate any electrical light or power
switches (ON or OFF).
(e) Ventilate the building(s) by opening doors &
windows.
(f) Ensure access to the premises can be made.
Please report the incident immediately to Gas
Networks Ireland (1850 20 50 50), National Gas
Emergency Service Call Centre (0800111999 for
UK or 0800002001 for Northern Ireland) or in the
case of LPG, the gas supplier whose details can be
found on the bulk storage vessel or cylinder.
The gas supply must not be used until remedial
action has been taken to correct the defect and the
installation has been recommissioned by a compe-
tent person.
Provision of an alarm must not be considered a
substitute for either installing the appliance
correctly or ensuring regular servicing and
maintenance of the appliance and chimney
system.
WARNING:-
If the CO Alarm sounds unexpectedly:-
1. Turn off the stove immediately.
2. Open Doors and windows to ventilate the
room and then leave the premises.
Summary of Contents for Argon F500 OVAL
Page 23: ...WIRING DIAGRAM 23 ...
