Page 95
HX870E
12.7 SOFT KEYS
This menu item allows soft key assignment and how long the display will show
the soft key icon after a soft key is pressed.
12.7.1 Key Assignment
1. Press the
MENU
key to display “
MENU
”.
GM SETUP
WAYPOINT SETUP
BACK
SETUP
CH SETUP
GPS SETUP
ATIS SETUP
CONFIGURATION
SELECT
DIMMER
LAMP
CONTRAST
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
CONFIGURATION
BACK
SELECT
KEY ASSIGNMENT
BACK
CONFIGURATION
KEY TIMER
SELECT
SOFT KEY
1:PRESET
BACK
CONFIGURATION
2:TX HI/MD/LO
3:MOB
4:SCAN MEMORY
5:SCAN
SELECT
KEY ASSIGNMENT
NONE
BACK
CONFIGURATION
TX HI/MD/LO
SCAN
DUAL WATCH
WPT MARK
ENTER
KEY SELECTION
2. Select “
SETUP
” with the
CH▼
/
CH▲
/
◄
/
►
key, then press the
[SELECT]
soft key.
3. Select “
CONFIGURATION
” with the
CH▼
/
CH▲
key, then press the
[SELECT]
soft key.
4. Select “
SOFT KEY
” with the
CH▼
/
CH▲
key,
then press the
[SELECT]
soft key.
5. Select “
KEY ASSIGNMENT
” with the
CH▼
/
CH▲
key, then press the
[SELECT]
soft key.
6. Press the
CH▼
/
CH▲
key to select the key
number to be programmed, and press the
[SELECT]
soft key.
7. Press the
CH▼
/
CH▲
key to select a new
function to be assigned, and press the
[ENTER]
soft key. Available functions are
listed below. By selecting “NONE” the soft
key assignment is removed.
8. Repeat steps 6 and 7 to program other soft
keys. Up to 12 functions can be assigned.
9. Press the
CLR
key to return to radio operation.
DISPLAY
FUNCTION
HI/MD/LO
Selects transmit power.
SCAN
Turns on or off scanning function.
DW/TW
Turns on or off dual or triple watch scan.
MOB
Marks the position where a person falls overboard.
COMP
Enables the “Compass” display.
NAVI
Enables the “Waypoint” or “Route” navigation display.
MARK
Marks the current position for a “Waypoint”.
MEM
Add or remove channels from memory channel scan.
PRESET
Programs or deletes the preset memory channel.
NAME
Edit channel names.
STROBE
Turns on or off the strobe light LED.
LOGGER
Starts and stops logging position data.
NCR
Enables the noise canceling settings display.
