Standard Horizon HX870E, Owner'S Manual

Page: 115 / 132

Page 115 HX870E
15.12 LOGGER INTERVAL
1. Press the MENU key to display “
MENU
”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
UNITS OF MEASURE
PINNING
POSITION INPUT
D-GPS
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
GPS SETUP
BACK SELECT
ON
ON
5sec
BACK
GPS SETUP
15sec
30sec
1min
5min
ENTER
LOGGER INTERVAL
2. Select “
SETUP
” with the CH▼ / CH▲ / ◄ / ►
key, then press the [SELECT] soft key.
3. Select “
GPS SETUP
” with the CH▼ / CH▲ key,
then press the [SELECT] soft key.
4. Select “
LOGGER INTERVAL
” with the CH▼ /
CH▲ key, then press the [SELECT] soft key.
5. Press the CH▼ / CH▲ key to select the
desired time and press the [ENTER] soft
key.
Note: Log time for each logger interval
setting
5 sec
: Aprox. 8 hours
15 sec : Aprox. 25 hours
30 sec
: Aprox. 50 hours
1 min : Aprox. 100 hours
5 min
: Aprox. 500 hours
6. Press the CLR key to return to radio operation.
15.13 LOG ERASE
1. Press the MENU key to display “ MENU ”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
UNITS OF MEASURE
PINNING
POSITION INPUT
D-GPS
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
GPS SETUP
BACK SELECT
ON
ON
CANCEL
BACK
GPS SETUP
OK
ENTER
LOG ERASE
2. Select “
SETUP
” with the CH▼ / CH▲ / ◄ / ►
key, then press the [SELECT] soft key.
3. Select “ GPS SETUP ” with the CH▼ / CH▲ key,
then press the [SELECT] soft key.
4. Select “
LOG ERASE
” with the CH▼ / CH▲ key,
then press the [SELECT] soft key.
5. Press the CH▼ / CH▲ key to select “
CANCEL
”
or “ OK ”, then press the [ENTER] soft key.
6. Press the CLR key to return to radio opera-
tion.