manualshive.com logo in svg

Standard Horizon 30143X3D, Owner'S Manual

The Standard Horizon 30143X3D Owner's Manual is a comprehensive guide for operating and maintaining your device. Easily access and download this essential manual for free from our website, ensuring you have all the necessary instructions to optimize your product's performance.

Share
Download
background image

Page 95

GX3000S

18  SPECIFICATIONS

Performance specifications are nominal, unless otherwise indicated, and are
subject to change without notice.

18.1  GENERAL

Channels .............................................................. All USA, International and Canadian
Input Voltage .......................................................................................... 13.8 VDC ±20%
Current Drain

Standby .............................................................................................................. 0.4 A
Receive .............................................................................................................. 1.5 A
Transmit .................................................................................... 5.5 A (Hi); 1.5 A (Lo)

Dimensions .................................................................................. 3.1” H x 7” W x 5.9” D

(80 H x 180 W x 150 D mm)

Flush-Mount Dimensions ............................................................ 3.6” H x 6.5” W x 6” D

(92 H x 165 W x 150 D mm)

Weight ........................................................................................................ 2.2 lbs (1 kg)

18.2  TRANSMITTER

Frequency Range .................................................................... 156.025 to 157.425 MHz
RF Output ........................................................................................ 25 W (Hi); 1 W (Lo)
Conducted Spurious Emissions .................................................. 80 dB (Hi); 60 dB (Lo)
Audio Response ............................................................... 1/–3 of a 6 dB/octave

pre-emphasis characteristic at 300 to 3000 Hz

Audio Distortion ......................................................................................................... 5 %
Modulation ....................................................................... 16K0G3E, for DSC 16K0G2B
Frequency Stability (-20°C to +50°C) ............................................................ ±0.0005%
FM Hum and Noise ............................................................................................... 50 dB

18.3  RECEIVER

Frequency Range .................................................................... 156.050 to 163.275 MHz
Sensitivity

12 dB SINAD ................................................................................................ 0.28 µV
12 dB SINAD (70 CH Receiver) ................................................................... 0.28 µV
Squelch Sensitivity (Threshold) ..................................................................... 0.2 µV

Modulation Acceptance Bandwidth .................................................................. ±7.5 kHz
Selectivity

Spurious and Image Rejection (TYP.) ........................................................... –70 dB
Intermodulation and Rejection at 12 dB SINAD (TYP.) ...............................  –75 dB

Audio Output .......................................................................................................... 4.5 W
Audio Response .............................................................  2/–8 of a 6 dB/octave

de-emphasis characteristic at 300 to 3000 Hz

Frequency Stability (-20°C to +50°C) ........................................................... ±0.0005 %
Channel Spacing ................................................................................................. 25 kHz
DSC Format ................................................................................................. ITU Class D
NMEA Input/Output ......................................................................... Output - DSC, DSE

Input - GLL, GGA, RMC and GNS

FCC ID: K6630143X3D/IC ID: 511B-30143X3D

Vertex Standard Co., Ltd.

Summary of Contents for 30143X3D





































































































Reviews:

No comments

Related manuals for 30143X3D

Varec 8200 Installation And Operation Manual preview
8200
Brand: Varec Pages: 38
Yaesu FTM-350R - SOFTWARE UPDATE PROCEDURE 7110 Operating Manual preview
FTM-350R - SOFTWARE UPDATE PROCEDURE 7110
Brand: Yaesu Pages: 18
Yaesu FTM-350R - SOFTWARE UPDATE PROCEDURE 7110 Technical Supplement preview
FTM-350R - SOFTWARE UPDATE PROCEDURE 7110
Brand: Yaesu Pages: 67
Yaesu FTM-100DR/DE Operating Manual preview
FTM-100DR/DE
Brand: Yaesu Pages: 176
Yaesu FTDX5000 CAT BOOK Operating Manual preview
FTDX5000 CAT BOOK
Brand: Yaesu Pages: 148
Yaesu FT2DR Instruction Manual preview
FT2DR
Brand: Yaesu Pages: 56
Yaesu FT-950 Brochure & Specs preview
FT-950
Brand: Yaesu Pages: 12
Yaesu FT-920 Operating Manual preview
FT-920
Brand: Yaesu Pages: 98
Yaesu FT-8100R Technical Supplement preview
FT-8100R
Brand: Yaesu Pages: 96
Yaesu FTM-7250DR Operating Manual preview
FTM-7250DR
Brand: Yaesu Pages: 48
Yaesu FT3DR Technical Supplement preview
FT3DR
Brand: Yaesu Pages: 53
Yaesu FT3DR Operating Manual preview
FT3DR
Brand: Yaesu Pages: 98
Yaesu FT1DR Instruction Manual preview
FT1DR
Brand: Yaesu Pages: 46
Yaesu FT1DR Operating Manual preview
FT1DR
Brand: Yaesu Pages: 156
Yaesu Mark-V FT-1000MP Installation Instructions preview
Mark-V FT-1000MP
Brand: Yaesu Pages: 4
Yaesu FTDX-9000D Operation Manual preview
FTDX-9000D
Brand: Yaesu Pages: 156
Yaesu FTDX-9000 Contest Reference Book preview
FTDX-9000 Contest
Brand: Yaesu Pages: 12
Yaesu VX-120 Series Operating Manual preview
VX-120 Series
Brand: Yaesu Pages: 88

Brands by name

Popular brands

Load more brands