Standard Horizon 30143X3D, Owner'S Manual

Page: 79 / 100

Page 79 GX3000S
14.3 MANUAL INPUTTING OF THE GPS LOCATION
(
LAT/LON
)
You may send the Latitude/Longitude of your vessel manually from the VH-310
Handset even if the GX3000S is not connected the GPS receiver unit.
After the position is entered, transmitting a DSC Distress, Position Request, or
Position Send will contain the manually entered position.
1. Press and hold down the [ CALL
(
MENU
)] key until “
Radio
Setup ” menu appears.
2. Press the [
] key to select “
DSC SETUP ” menu.
3. Press the [ ENT
] key, then select “
POS INPUT
” with the [
]/
[ ] key.
4. Press the [ ENT
] key then, enter the your local time from the
keypad by the 24-hour system on the UTC time.
5. Enter the Latitude of your vessel location (xx.xx.xx) by the
keypad, then press the [ 6
(
NAV
)] key to select North (N), or
[
7
(
SCRM
)] key to select South (S).
6. Enter the Longitude of your vessel location (xxx.xx.xx) by
the keypad, then press the [ 3
(
SCAN
)] to select East (E), or
[
9
(
FOG
)] key to select West (W).
7. If a number was entered by mistake, press the H/L key re-
peatedly to select the number. Press the [
]/[ ] key to se-
lect the desired number.
8. Press and hold in the [ ENT
] key to store the data entered,
then press the [ 16/9
] key to exit this menu and return to
radio operation mode.
FCC ID: K6630143X3D/IC ID: 511B-30143X3D
Vertex Standard Co., Ltd.