Standard Horizon 30143X3D, Owner'S Manual

Page: 78 / 100

GX3000S Page 78
14.2 INTERCOM OPERATION
14.2.1 Communication
1. Press the [ F
] key followed by the [
5
(
IC
)] key, the mode is changed to “IN-
TERCOM” mode.
2. When the “INTERCOM” operation is activated, “ IC ” is dis-
played on the VH-310 Handset (and RAM+ Mic, if used)
and “INTERCOM” is displayed on the GX3000S .
3. Press the PTT switch, “ TALK ” is displayed.
NOTE : A warning beep is emitted when the RAM+ Mic PTT switch is pressed
while the transceiver microphone’s PTT
switch is pressed.
4. Speak slowly and clearly into the mi-
crophone, hold the microphone about
1/2 inch away from your mouth.
5. When finished, release the PTT switch.
6. To exit the “INTERCOM” mode and
return to radio operation mode, press
the [
F
] key followed by the [
5
(
IC
)] key
again.
14.2.2 Calling
Press and hold the [ 5
(
IC
)] key for 1 second when the “INTERCOM” operation is
activated, a calling beep is emitted from the GX3000S speaker.
(
VH-310 ’s PTT switch is pressed)
(
GX1500S ’s PTT switch is pressed)
FCC ID: K6630143X3D/IC ID: 511B-30143X3D
Vertex Standard Co., Ltd.