Standard Horizon 30143X3D Owner'S Manual Download Page 15

Page: 15 / 100

Page 15

GX3000S

Figure 1. MMB-84 Flush Mount Installation

8.9 OPTIONAL MMB-84 FLUSH MOUNT INSTALLATION

1. To assist in flush mounting, a template has been included. Use this tem-

plate to find the mounting location.

2. Use the template to mark the location where the rectangular hole is to be

cut. Confirm the space behind the dash or panel is deep enough to accom-
modate the transceiver (at least 6 inches or 15 cm deep).
There should be at least 1/2 inch (1.3 cm) between the transceiver’s heatsink
and any wiring, cables or structures.

3. Cut out the rectangular hole and insert the transceiver.
4. Fasten the brackets to the sides of the transceiver with the lock washer nut

combination; so that the mounting screw base faces the mounting surface
(see Figure 1).

5. Turn the adjusting screw to adjust the tension so that the transceiver is tight

against the mounting surface.

Bracket

Adjusting Screw

Lock-washer nut combination

FCC ID: K6630143X3D/IC ID: 511B-30143X3D

Vertex Standard Co., Ltd.

Summary of Contents for 30143X3D





































































































Search results

Summary of Contents for 30143X3D

Reviews:

Related manuals for 30143X3D

Brands by name

Popular brands

Standard Horizon 30143X3D, Owner'S Manual

Search results

Summary of Contents for 30143X3D

Reviews:

Related manuals for 30143X3D

Brands by name

Popular brands